Club Car Onward 2018 Service Manual (English)

Questions and Answers:

K
Karen MendozaJul 30, 2025
What to do if the Club Car Onward 2018 Golf Cars handset display screen is blank?
- G
  gcastroJul 30, 2025
  If the handset display screen is blank, there could be several reasons. The handset cord or adaptor might be disconnected. The vehicle batteries may have loose terminals, corrosion, be improperly wired, failed, or not fully charged. The handset cord or adaptor could have failed. The CDT port might have failed, or the contrast setting could be too light. The controller might be in power-down mode. If the charger has been connected for over 10 minutes, disconnect it, wait 30 seconds, and reconnect it. There may be loose vehicle wire harness connections, a speed controller malfunction, or the handset itself may have failed. If the controller is in power-down mode (vehicle unused and not charged for 72 hours), connect a charger or drive the vehicle a short distance, then reconnect the handset.
E
Elizabeth MarquezAug 7, 2025
What to do if the Club Car Onward 2018 Golf Cars handset is “locked-up” and buttons do not respond?
- G
  gosbornAug 7, 2025
  If the handset is locked up, it could be due to a handset malfunction. Try disconnecting the CDT cord from the vehicle, waiting a few seconds, and then reconnecting the handset to the vehicle. It could also be related to the vehicle batteries having loose terminals, corrosion, being improperly wired, failed, or not fully charged. Another potential cause is a speed controller malfunction.
J
Johnny BrownAug 19, 2025
Why does the Club Car Onward 2018 display screen show jumbled characters?
- J
  Jeffrey HardySep 12, 2025
  A display screen showing jumbled characters can be caused by a speed controller malfunction, a handset malfunction (try disconnecting and reconnecting the CDT cord), a loose connection at the CDT port, intermittent handset cord failure, intermittent handset cord adaptor failure, or loose vehicle wire harness connections.