CME BodyGuard 595 Color Vision - Installation and Setup Procedures

3 – Installation and Set Up
BodyGuard 595™Color Vision Operator Manual
19
3 – Installation and Set Up
Unpacking
1.
Carefully remove the pump and Charger from the box.
2.
Make sure no items were damaged during shipment
3.
Make sure you have the following items:

BodyGuard 595 Color Vision™ Infusion Pump

Charging Cradle with Power Cord or Battery Charging Cable

Rechargeable Battery Pack

Operation Manual

Bolus cable

9V Alkaline Battery compartment (optional)

Disposable Battery Pack (optional)

External charger (optional)

Extended life battery Li-Ion Polymer
If any items are missing or damaged, contact your BodyGuard 595 Color Vision™
supplier.