CME BodyGuard 595 Color Vision - Default Settings

4 – Operation
BodyGuard 595™Color Vision Operator Manual
60
Default Settings
The pump comes programmed with a number of default parameters that can be viewed
using ‘View Set Up’ from the main menu and changed using the technician access code
in ‘Change Set Up’ mode.
PARAMETER
PURPOSE
RANGE
Battery Level
Current battery charge
Empty >> Full
Time, Date
Set/View time and date
Keystroke Volume
Volume of keystroke
0-7
Alarm Sound Volume
Volume of alarms/alerts
4-7
Priming Volume
Amount of fluid delivered during
set priming.
0-20ml
Priming Rate
Rate at which priming occurs.
300-1000 ml/hr.
Maximum Bolus
Maximum bolus volume for a
protocol
100ml
Maximum CA Bolus
Maximum bolus volume allowed by
a clinician
60ml
Bolus Rate
Rate at which boluses are
delivered
40-1200ml
System will adapt rate
according with in-line
backpressure
Maximal Basal Rate
Maximum continuous basal rate
PCA 0.1 - 100 ml/hr
Epidural 0.1 - 30 ml/hr
Regional 0.1 - 100 ml/hr
Keep Vein Open Rate
A continuous rate after infusion
program has ended which is
designed to prevent coagulation
and keep an IV line open
0ml/hr (Disable)
0.1-5ml/hr
Program Limits
MediGuard option
On/Off
Minimum Lockout
Minimum lockout time between
boluses
0-240min
Led Indicator
Switches the LED indicator
On & Off
ON/OFF
Bolus Titration
Change bolus volume during
infusion
ON/OFF
Info screen duration
Number of seconds the info screen
is displayed before returning to the
current infusion screen
1-255 sec
Language
Change between available
language (may vary between
software version)
English, Spanish, Italian,
German (Deutch), French,
Dutch
Serial No.
Serial Number Unique Pump
Fixed data
Production Date
Date of manufacture
Day-month-year
Operating Hours
Hours since last service
Software Ver.
Pump software version
Fixed data
Volume Calibration
Volumetric calibration value
Fixed data
Pressure Delta
Pressure calibration Delta value
Pressure CAP
Pressure calibration CAP value
Fixed data – 255
Main Self-test
Automatically test all pumps