CME BodyGuard 595 Color Vision User Manual

4 – Operation
BodyGuard 595™Color Vision Operator Manual
26
levels of security to ensure safe set up and administration of pain protocols and to
prevent idle or malicious tampering.
Access Codes & Keypad Lock
To operate, program and configure the BodyGuard 595 Color Vision™ Infusion pump
three Access Codes are required.
All codes and codes levels can be modified and controlled from technician menu.
Level One
700
Allows user to run pre-set protocols and titrate
infusion rate (within pre-set protocol limits).
Level Two
*
Allows authorized users to deliver Clinician Activated
Bolus or loading dose.
Level Three
**
Allows users to set up or modify standard infusion
protocols & change pump configuration parameters in
‘Change Set Up’.
* / ** refer to senior clinical or lead service personnel.
Additionally, a technician’s code is necessary to access the technician menu but this is
only provided to fully trained & authorized electrical biomedical engineering
departments.
Keypad Lock
To Lock Keypad
Press and hold until the entire graph is black and
a beep is heard. The beep indicates that the locking
program is turned ON.

NOTE: the keys are locked in memory until they are unlocked or until entering
Change setup mode.
EPIDURAL 10:00 - 70% █ ■
Keypad
Lock Mode
████████████████
Off On

CME BodyGuard 595 Color Vision Specifications

General

Brand	CME
Model	BodyGuard 595 Color Vision
Category	Medical Equipment
Language	English