CME BodyGuard 595 Color Vision User Manual

4 – Operation
BodyGuard 595™Color Vision Operator Manual
59
2.
Fix the obstruction in the I.V. line and press to continue.
View Set Up
1.
Selecting ‘View Set Up’ from the menu and pressing allows you to scroll
through, select and view any of the default parameters or events history.
2.
Simply scroll to a parameter you wish to view and press _ .
In this mode you can only view the parameters but cannot change any of the
values which users can configure.
Change Set Up
For users to configure the variable default settings they must use the Technicians
Access Code. To change default settings follow these steps:
1.
From the main menu select ‘Change Set Up’ and press .
2.
Enter the relevant access code & press again.

NOTE: not all default parameters mentioned in the above table can be
configured by the user. Only those highlighted in the table are changeable at a
local level.
3.
Scroll through the parameters to the one you wish to change and press . If it
is a numeric value simply key in the new value and press . If it is an optional
value, scroll through the options and press _to confirm your choice.
4.
Once the user has changed or confirmed a parameter the pump returns to the Exit
choice. Press _to exit or scroll down to view/change another parameter
(repeating step 3 above).

CME BodyGuard 595 Color Vision Specifications

General

Brand	CME
Model	BodyGuard 595 Color Vision
Category	Medical Equipment
Language	English