Settings
98-171832-A Chapter 2: Operation 45
AUTO-ACK Auto-acknowledgment:
•Test:
Auto-acknowledgment of test DSC messages.
Disabled or Enabled (default)
• Poll:
Auto-acknowledgment of polling DSC messages.
Disabled or Enabled (default)
• Position:
Auto-acknowledgment of position DSC messages.
Disabled (default) or Enabled
• Individual:
Auto acknowledgment of individually addressed, non distress
DSC messages with channel unavailable for communication.
Disabled or Enabled (default)
NON-
DISTRESS
INACTIVITY
Inactivity time-out to exit non-distress functions (e.g. in setup)
without automatic time-out:
Range: OFF, 1 to 30 minutes, in 1 min. steps
Default: 15min.
DISTRESS
INACTIVITY
Inactivity time-out for received distress DSC automated
procedures without automatic time-out:
Range: OFF, 1 to 30 minutes, in 1 min. steps
Default: OFF
COMM
INACTIVITY
Inactivity time-out of non DSC communication (VHF).
Range: 10 to 600 seconds, in 10 second steps
Default: 30sec
NON-
DISTRESS
SOUND
Sound at non-distress DSC alarms:
• OFF: Sound disabled
• Single ring: Sound only once (default)
• Repeated ring: Repeat sound cyclic
MEDICAL
TRANSPORT
• ON: This option is available in DSC calls of the type Urgency.
• OFF (default)
Parameter Description
To Next Page
Loading...
