Settings
46 Chapter 2: Operation 98-171832-A
POWER SUPPLY
NEUTRAL
CRAFTS
• ON: This option is available in DSC calls of the type Urgency.
• OFF (default)
AUTO
CHANNEL
SWITCH
• OFF: Automatic channel switching is disabled, icon LCK will be
visible in stand-by mode.
• ON: Automatic channel switching is enabled (default)
PRINT DSC For printing of DSC messages on a printer connected to the system.
• ON or
• OFF (default)
Parameter Description
MONITOR Set this to ENABLED if the radio is connected to a TT-6081A Power
Supply and Charger.
Set this to DISABLED (default) for any other power supply.
STATUS If MONITOR enabled: Current status of the connected power supply.
VOLTAGE If MONITOR enabled: Current voltage.
CURRENT If MONITOR enabled: Current current.
Parameter Description
To Next Page
Loading...
