Settings
98-171832-A Chapter 2: Operation 49
SYSTEM
Parameter Description
SOFTWARE
UPDATE
• USB Mass Storage: Select a tiif file from a connected USB
device.
• Upload: Select a tiif file from a connected PC.
PAIRING If not paired:
Opens a list of all nearby transceiver units (TU) with
• Serial number
• pairing status (paired to another control unit (CU) or not)
•SW version
• Pairing button for pairing the CU to the TU
If paired:
Shows information on the TU that the CU is paired to:
• Serial number
• SW version and SW version compatibility
• Unpair button for unpairing the TU from the CU
FACTORY RESET Resets the radio to factory defaults.
Tap OK to confirm.
SAVE
CONFIGURATION
• USB Mass Storage: Save the configuration to a connected
USB device.
• Download: Save the configuration to a connected PC.
LOAD
CONFIGURATION
• USB Mass Storage: Select a configuration file from a
connected USB device.
• Upload: Select a configuration file from a connected PC.
CHANGE
PASSWORD
Change the password for accessing password-protected parts
of the user interface.
To Next Page
Loading...
Need help?
General
