C002332_02_CR3 User Manual - 40
Save Settings
For an explanation of Pharmacode settings and all programming codes please refer to Appendix
G of the CR3 User’s Manual. You may download the Appendix G at:
www.codecorp.com/support/usermanuals.htm
3.19 - Pharmacode
All postal codes default settings are OFF. Scan the following codes to enable the appropriate Postal
symbology:
Note: If you wish to change which Postal code is activated, you MUST scan the disable all postal codes
symbol and then scan your desired symbology.
Australian Post On Japan Post On KIX
Planet On Postnet On Postnet and Planet On
3.20 - Postal Symbologies
Royal Mail On Disable All Postal Codes (Default) Sample Postnet Code
To Next Page
Loading...