C002332_02_CR3 User Manual - 42
Save Settings
Scan the following codes to enable/disable Telepen symbology settings:
Telepen On Telepen Off (Default) Sample Telepen
3.23 - Telepen Symbology
3.24 - UPC/EAN/JAN
Scan the following codes to enable/disable UPC/EAN/JAN symbology settings:
UPC On (Default) UPC Off UPC Short Margin Enabled
UPC Short Margin Disabled (Default) UPC Extension On UPC Extension Off
Sample UPC A Code
Sample RSS Limited Code Sample RSS 14 Code
Sample RSS 14 Truncated Code Sample RSS 14 Stacked Code
To Next Page
Loading...