Code Corporation Code Reader 3.0 - Reader Text Commands; Erase PrefiX and SuffiX Settings

C002332_02_CR3 User Manual - 56
Save Settings
Suffix - Tab Suffix - Tab Suffix - Erase / None
6.3 - Reader Text Commands
Enabling Reader Text Commands, allows the CR3 to accept text commands via RS232 or RF
commmunication. Scan the following codes to enable/disable reader text commands:
Reader Text Commands On (Default) Reader Text Commands Off
Only Use with USB
Keyboard, PS2
Keyboard Mode or
with CodeXML Router
or PS2 CodeXML
Bluetooth Modem
Only Use with
RS232 Mode
6.4 - Erase Prefix and Suffix Settings
Scan the following codes to erase all prefix and suffix data.
Erase Prefix & Suffix Data
This code will
erase all suffix
data.