Code MINI 1000 - User Effect; Save User Effects; Delete User Effects

MINI_1000_en.pdf http://www.codelight.com
25
5.4. User Effect
After created a new shape effect you can save to “User Effects” so that you can use the
same effect in other fixtures in future.
5.4.1. Save User Effects
1. Select system Effects and adjust necessary parameters;
2. Select [Save Running Effects];
3. Select a soft-key on “User Effects”;
4. Entry the name for the effect and [Confirm];
5. Press [Return] to exit edit.
5.4.2. Delete User Effects
Select [Delete User Effect] can delete one of the user effects if you need.
Select [Delete All User Effects] can delete all the user effects you had saved.
Note: If you want to delete one of the user effects, you can use Delete function
and select the right key on the Effect on selection part.
①
②
③