MINI_1000_en.pdf http://www.codelight.com
49
Blackout Key for FLASH --- The option defaults in [Enable]. The key is use for flashing
output when the master fader does not fade in. If the option is in [Disable], the key is used
as blackout function for all outputs.
Page for Touch Screen --- The option defaults in [Disable]. User can turn pages on
selection part while the option on touch screen will stay at its own page. You may select the
right options in different pages at the same time. While the option is in [Enable], the option
on touch screen will turn pages together when you turn pages on selection part.
On “User setting”, you can change the output refresh rate (26~37HZ) to match some of
special fixtures.
Users can reset all options here by [Set to Default].
8.1.2. Select Language
Users can set display language of the console in Chinese or English.
8.2. Misc. Setting
8.2.1. Date and Time
Users can set the local time which will display on top of touch screen.
To Next Page
Loading...
