MINI_1000_en.pdf http://www.codelight.com
43
8. Users may play the music on external equipment again. The macro show will run the
playbacks or presets follow the time code as when recording. The internal clock will
change into audio time code when begin playing the music. The operation state will be
shown on the touch screen if it is in record window.
9. The macro show will stop automatic when finished playing.
7.6.2. Internal Clock
This mode can be used in the situation when users do not have the midi cable or external
midi device.
1. Select [Time code Mode = Internal Clock] and select a record key on Macro;
2. Press the soft-key , it will turns red means start to record .
The macro show begins to record once this soft-key turns red. The time code is based on
the internal clock which shows as follow.
To Next Page
Loading...
Need help?
Power
Weight and Dimensions
