ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
157
Comm object 8708 Related applications
Description
There are two new protections related to RPM-BI3 where functions RPMdiff Sd (page 158), RPMdiff
Wrn (page 159) limits depends on setting of GearBoxRatio:
Separate RPM-BI3 underspeed Wrn and Sd protection when Engine protect: GearBoxRatio = 0.0
Difference check between RPM and RPM3 with calculation of gear-box ratio, when Engine protect:
GearBoxRatio > 0.0. Protection is active when engine is READY TO LOAD (PAGE 201).
Note: The RPM-BI3 measuring and corresponding protections are switched off when GearTeethBI3
(page 98) = 0. In this case BI3 operates as standard binary input.
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English