ID-FLX Lite & Telecom Global Guide
181
Setpoint group ATTsettings Related FW 2.5.0
Range [units] [Enabled, Disabled]
Default value Enabled -
Step -
Comm object 16190 Related applications
Description
This setpoint is used to deactivate Aftertreatment screen. If option Disabled is selected, the
Aftertreatment screen will not be displayed even if ECUis configured and controller is receiving
Aftertreatment specific frames.
There is a possibility to block Aftertreatment screen. This feature can be used in case the screen is
activating due to receiving a ATT frames from ECU even though the engine itself is without
Aftertreatment.
ATT screen
6 back to List of setpoints
To Next Page
Loading...
