ComAp InteliDrive Lite

ID-FLX Lite & Telecom Global Guide
180
Group: ATTsettings
Setpoint group ATTsettings Related FW 2.5.0
Range [units]
Default value -
Step
Comm object 14520 Related applications
Description
Regen Inhibit – set ECU value Aftertreatment Regeneration Inhibit Switch (SPN 3695). There can be
set:
OFF – automatic filter regeneration is enabled - SPN 3695 = 00b
ON – automatic filter regeneration is inhibited - SPN 3695 = 01b
BIN – value is set by LBI Regen Inhibit
Transmitted value is set by actual level of parameter ON/OFF or by level of LBI.
Regen Inhibit
6 back to List of setpoints
Setpoint group ATTsettings Related FW 2.5.0
Range [units]
Default value -
Step
Comm object 14521 Related applications
Description
Regen Force – set ECU value Aftertreatment Regeneration Force Switch (SPN 3696). There can be
set:
OFF – automatic filter regeneration is enabled
ON – automatic filter regeneration is inhibited
BIN – value is set by LBI Regen Force
Transmitted value is activated for 5 sec. by rising edge of parameter change OFF to ON or LBI.
Regen Force
6 back to List of setpoints