ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
487
41 Can't read operator name
42 ME909s: can't set flow control
43 APN not typed
255 Only running communication is needed to indicate
6 back to List of values
Value group
CM-GPRS; CM-4G-
GPS (4G part)
Related FW 1.9.0
Units %
Comm object 24300 Related applications AMF, MRS
Description
This value contains information about relative quality of the cellular signal received by the CM-GPRS module
or by CM-4G-GPS module. The lower value means higher quality of signal.
Cell ErrorRate
6 back to List of values
Value group
CM-GPRS; CM-4G-
GPS (4G part)
Related FW 1.9.0
Units %
Comm object 24302 Related applications AMF, MRS
Description
This value contains information about relative strength of the cellular signal received by the CM-GPRS
module or by CM-4G-GPS module. It is a relative value helping to find the best signal and for troubleshooting
cases.
Cell Signal Lev
6 back to List of values
Value group
CM-GPRS; CM-4G-
GPS (4G part)
Related FW 1.9.0
Units [-]
Comm object 24290 Related applications AMF, MRS
Description
The text of this value represents the status of the GSM modem.
Cell Status
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65