ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
647
Outputs
No outputs.
Description
This block issues alarms of configured type and text when appropriate binary input is activated.
Image 9.12 Configuration of Force Prot block
Available protections are:
Monitoring
HistRecOnl
AL Indic
Wrn
Wrn+BOC
BOC
Wrn+Sd
Sd
Note: Maximal number of characters for alarmlist message is 15.
Note: Prefix of protection (e.g. Wrn, Sd, BOC) is added automatically into alarmlist message.
6 back to List of PLC blocks
8.2 Alarms
8.2.1 Alarms level 1 647
8.2.2 Alarms level 2 671
8.2.3 Fail sensor and other types 689
What alarms are:
The controller evaluates two levels of alarms. For more information see Alarm management on page 97.
8.2.1 Alarms level 1
Warnings 650
Other type 664

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65