SERIAL NUMBER PROGRAMMING
This function is used to change the serial number of individual devices in the system which is running and connected to the PC via the SIMPLEHOME/
RS232 interface, without having to lock or disassemble the system. The reprogrammed device will keep running in accordance with the settings
made previously (inputs, outputs and scenarios), but its serial number will be different.
N.B. this function is useful if you have to change the intended use of a module without even slightly altering the electrics in the system created,
for example a light which is no longer controlled by a certain group of buttons but by others instead.
AVAILABLE COMMANDS
Select the current serial number of the module you wish to change
Select the new serial number you wish to assign to the module
Con rm the new serial number you wish to assign to the module
Cancel the "SERIAL NUMBER PROGRAMMING" function
and return to the main screen
55
To Next Page
Loading...