2.3 - ART. 20046502 - SIMPLEHOME MODULE WITH 5 DIGITAL INPUTS
AND 4 TRANSISTOR OUTPUTS, FLUSH-MOUNTED (5I4O)
The module with 5 digital inputs / 4 transistor outputs allows the connection of up to 5 contacts (buttons, switches, diverters, inverters,
general sensors...) for controlling the outputs on the SimpleHome system module. and 4 transistor outputs for direct connection of
the 24 V indicator LEDs in cc or a relay with a maximum activation current of 50 mA.
The compact interface can be installed in traditional "3-module" boxes (concealed behind the electromechanical modules in the civil
series) or in junction boxes.
The module with 5 digital inputs is powered directly by the bus.
Technical characteristics
Power supply voltage 24 Vdc ± 5%
Absorption min. 5 mA, max. 22 mA
Inputs 4+1, optically coupled digital type
Outputs 4 transistor 24 Vdc 50 mA max. per output
Max. input cable length 25 m
Protection against reverse polarity
Indications
1 indicator LED: when fl ashing, indicates data transmission via bus, when lit steadily indicates lack of
power supply negative or incorrect device connection
Lack and restoring of
power supply
Output status memory
Terminals removable for BUS connection
Positioning in fl ush-mounted boxes
Applicable standards
electromagnetic compatibility: EN 50081-1 (interference emission) and EN50082-2 (resistance to
interference)
Approvals CE
Operating temperature 0° to 50°C
Storage temperature -10° to +70°C
Relative air humidity 5 to 95% with no condensation
Weight 24 g (not including packaging)
Dimensions 41x29x9 mm
12
To Next Page
Loading...