Climate control
20004100 SENSOR CLIMATE ZONES, Minitouch Thermostat.
THERMOSTAT DESCRIPTION:
enter a description of the climate room which appears on the supervisor.
WINTER - SUMMER STATUS OUTPUT: this fi eld indicates the module number and the output number to control in order to make the
climate zone switch automatically between winter and summer modes. If the output is inactive, winter operating mode will be set; if the
output is activated, on the other hand, summer operating mode will be set. This output is used to set all the climate zones automatically
in summer or winter mode as the status of the set output changes. The activated output can be controlled, for example, by a switch
connected to a digital input or a supervisor.
ZONE FOR DAY - NIGHT - EMPTY SET: a zone number can be assigned to one of the 3 day, night or empty setpoints. This means it is
possible, by closing a digital input for example, to select the same setpoint on all thermostats or Minitouch units in the system.
74
To Next Page
Loading...