Index-3
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
DAAD (Drive Array Advanced Diagnostics)
Continued
diagnostic messages 3-36
starting 3-35
default configuration
messages 3-2
settings, description 3-2
Diagnose Drive Array utility, accessing 3-17
diagnostics
accessing 3-18
defined 3-17
diskette 3-17
error codes 3-17
recommended action 3-17
CD-ROM drive 3-31
DAAD messages 3-36
description 3-4
diskette drive 3-23
hard drive 3-25
hard drive, SCSI 3-31
keyboard 3-21
memory 3-20
modem 3-24
NetFlex-2 Controller 3-29
network interface boards, Compaq 3-30
parallel printer 3-21
pointing device 3-34
POST 3-4
processor 3-19
serial device 3-24
Server Manager/R Board 3-32
tape drive 3-26
tape drive, SCSI 3-32
Token Ring controller 3-29
VGA board 3-27
video board, monochrome 3-23
video display unit 3-22
running 3-18
software 3-17
time allowed for access 3-18
DIAGS See diagnostics
dimensions
CD-ROM drive 5-6
hard drive 5-9, 5-10, 5-11, 5-12
system unit 5-2
DIMMs
fault recovery tracking, defined 3-63
installation guidelines 2-30
installation order 2-30
part number 1-4
removing 2-32
DIMMs
Continued
removing, illustrated 2-32
replacing 2-30
shipped standard 2-30
specifications 5-4
speed 5-4
test error codes 3-20
upgrade combination examples 2-31
upgrade requirements 5-4
diskette drive
access speed 5-5
cable folding and routing, illustrated 2-28
LED indicators, color 5-5
LED indicators, illustrated 4-9
location 2-19
number supported 5-5
part number 1-4
removing 2-27
removing, illustrated 2-27
replacing 2-27
size 5-5
specifications 5-5
test error codes 3-23
diskette, creating diagnostics 3-17
display See Integrated Management Display
display module, part number 1-5
door, front bezel
part number 1-3
removing 2-7
removing, illustrated 2-7
replacing 2-7
Drive Array Advanced Diagnostics See DAAD
drive array, diagnosing 3-17
drive bay
description 2-19
locations 2-19
locations, illustrated 2-19
drive cage assembly
components 2-20, 2-22
converting from Simplex to Duplex 2-21
part number 1-5
removing 2-20, 2-22
removing, illustrated 2-20, 2-22
replacing 2-22
Duplex cage, location 2-19
Duplex Enabler board
removing 2-21
replacing 2-21
Duplex Hot-Plug Drive Cage, part number 1-5
To Next Page
Loading...
