Compaq ProLiant 3000

2-7
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
Front Bezel Door
To remove the front bezel door (tower model only):
1. Swing the front bezel door open approximately 45 degrees.
2. Lift the front bezel door up, then pull it away from the chassis.
COMPACT
Figure 2-3. Removing the front bezel door
NOTE: Drive cage may not be as illustrated.
Reverse steps 1 and 2 to replace the front bezel door.