CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
Upgrade To
U
Determines which installed software package that the
IP
M
odule or base modem firmware will overwrite when
upgrading with a new software package. The possible
options are:
0. Oldest – overwrite the oldest software package based
upon date.
1. Image1 – overwrite the software package loaded into
the first slot in permanent storage.
2. Image2 – overwrite the software package loaded into
the second slot in permanent storage.
Codecast Multicast Address
M
Multicast address used by Vload to upgrade the modem
firmware and param file via streaming multicast. Must
match the address specified in Vload.
PARAM Image
C
Identifies the PARAM file that will be loaded on bootup.
The options are:
1. Last saved Parameter file
2. Factory – uses the internal, hard-coded factory
default parameters.
Activates Statistics Menu page. Statistics
T
Activates Event Log page. Event Log
E
Activates Database Operations page. Database Operations
D
Reset
R
Allows user to reboot the modem (includes the IP
modem and base modem). It has the same logical effect
of power-cycling the unit.
Activates Diagnostics page. Diagnostics
G
Save Parameters
S
This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit
X
This option allows a user to exit the current menu and
return to its parent menu.
17–58
To Next Page
Loading...
