Comtech EF Data SLM-5650B

Need help?

Do you have a question about the Comtech EF Data SLM-5650B and is the answer not in the manual?

Summary

CHAPTER 1. INTRODUCTION

1.1 Overview

Provides a general overview of the SLM-5650B Satellite Modem and its capabilities.

1.2 Functional Description

Details the functional block diagram and describes the modem's design and features.

1.3 SLM-5650 B Features

Lists the key features and capabilities incorporated into the SLM-5650B Satellite Modem.

CHAPTER 2. INSTALLATION

2.1 Unpacking and Inspection

Provides instructions for safely unpacking and inspecting the SLM-5650B upon arrival.

2.2 Installation

Details the procedures for installing the SLM-5650B into a rack enclosure, including grounding and ventilation.

CHAPTER 3. REAR PANEL CONNECTORS AND PINOUTS

3.1 Overview

Provides an overview of the rear panel connectors and their purpose.

3.2 IF Connectors

Describes the L-Band and 70/140 MHz IF interface connectors.

3.3 Terrestrial Data Connectors

Details the various terrestrial data interface connectors, including Ethernet, EIA-530, and HSSI.

3.4 Utility Connectors

Describes utility connectors such as External Reference and Alarms.

CHAPTER 4. UPDATING FIRMWARE

4.1 Updating Firmware via Internet

Explains the process of updating the modem's firmware using an internet connection.

4.2 Bulk Firmware Update - Ethernet FTP Upload Procedure

Outlines the procedure for performing a bulk firmware update via Ethernet using FTP.

CHAPTER 5. FRONT PANEL OPERATION

5.1 Overview

Provides an overview of the front panel controls, LEDs, and display for monitoring and configuration.

5.2 SELECT: (Main) Menu

Describes the main menu structure and navigation for configuring modem parameters.

CHAPTER 6. ETHERNET-BASED MANAGEMENT

6.1 Introduction

Introduces the Ethernet management interface for remote monitoring and control of the modem.

6.2 Ethernet Management Interfaces & Protocols

Details the protocols (HTTP/HTTPS, SNMP, Telnet, SSH) used for Ethernet-based remote management.

CHAPTER 7. BASE MODEM HTTP;HTTPS INTERFACE

7.1 Overview

Describes the functionality of the Base Modem HTTP/HTTPS Interface.

7.2 Base Modem HTTP;HTTPS Interface Introduction

Explains how to access and use the web interface for modem configuration and monitoring.

CHAPTER 8. NETWORK PROCESSOR (NP) INTERFACE

8.1 Introduction

Introduces the Network Processor (NP) Interface Module and its primary operating modes.

8.2 Functional Hardware Description

Provides a functional block diagram and describes the hardware components of the NP Interface.

8.3 Interface Specifications

Details the physical and general specifications for the NP Interface.

CHAPTER 9. NP INTERFACE TELNET;SSH CLI OPERATION

9.1 Overview

Provides an overview of the Command Line Interface (CLI) user menu system for the NP Module.

9.2 Command Line Interface Pages

Describes the CLI menu structure, common information, navigation, and operation features.

APPENDIX A. TROUBLESHOOTING

A.1 Overview

Provides information for system checkout and fault isolation and identification.

A.2 System Checkout

Details procedures for checking the modem setup and verifying its functionality.

APPENDIX B. OPERATIONS REFERENCE

B.1 Overview

Provides reference guides for DSSS and non-DSSS LDPC modes.

APPENDIX C. REMOTE CONTROL

C.1 Overview

Describes the protocol and message command set for remote monitor and control.

APPENDIX D. MODEM OPTIONS

D.1 Forward Error Correction Options

Describes the available Forward Error Correction (FEC) options: Viterbi, Trellis, and TURBO.

D.3 Trellis Coding (FAST Option)

Explains Trellis Coded Modulation (TCM) and its implementation as a FAST Option.

D.5 Closed Network Mode

Details the parameters and operation of the Closed Network Mode.

D.8 Low Density Parity Check (LDPC) Coding (FAST Option)

Explains LDPC coding and its advantages and implementation as a FAST Option.