Comtech EF Data SLM-5650B - Utility: FAST

SLM-5650B Satellite Modem
Revision 2
Front Panel Operation 5–45 MN-SLM-5650B
5.2.7.9 Utility: FAST
FAST: Configuration S/N 000000012
View Options (E)
Select Configuration or View Options, and then press [ENT].
Utility: FAST  Configuration
FAST Configuration: Code1 Code2 Code3
Demo Mode: Off 604800 Secs remain (E)
Select New FAST Codes or Demo Mode, and then press [ENT].
Option
Description
New FAST Codes
This is a 20-digit code, purchased from Comtech EF Data, which permits
upgrading the modem functionality.
Legal characters are hexadecimal, 0-F.
Demo Mode
This Comtech EF Data feature allows the user to try out any capability of the
installed hardware for up to 168 hours (seven 24-hour days).
Utility: FAST  View Options
View Options: 01 Installed ()
Tx Data Rate <= 155.52 Mbps
Use the  arrow keys to list the options that the modem supports, and identify whether
or not they are installed/enabled. There are 26 options, listed as 01 – 26:
FAST
Option
Description
01
Tx Data Rate <=155.52 Mbps. (Shows Installed or Not Installed)
02
Rx Data Rate: <=155.52 Mbps. (Shows Installed or Not Installed)
03
8PSK/8QAM Modulation. (Shows Installed or Not Installed)
04
16-QAM Modulation. (Shows Installed or Not Installed)
05
TURBO FEC Option. (Shows Installed or Not Installed)
06
LDPC FEC Option. (Shows Installed or Not Installed)
07
Sequential Encoder/Decoder. (Shows Installed or Not Installed)
08
Triple Viterbi. (Shows Installed or Not Installed)
09
Reed-Solomon Coding. (Shows Installed or Not Installed)
10
Spectrum Spreading. (Shows Installed or Not Installed)
11
Reserved0. (Shows Installed or Not Installed)
12
Reserved1. (Shows Installed or Not Installed)
13
AUPC Overhead. (Shows Installed or Not Installed)