SLM-5650B Satellite Modem
Revision 2
TRANSEC Module HTTPS Interface 10–11 MN-SLM-5650B
10.4.1.6 SSH (Secure Shell) Console
Item Description
This key signature, or fingerprint, helps to identify the TRANSEC Module when
connecting through SSH. SSH clients typically show the host key signature when they
connect to a system for the first time. The user can then compare the host key the SSH
client shows with the host key the TRANSEC Module displays to verify that they are the
same.
Click Generate New Host Key to generate a new host key that uniquely identifies the
TRANSEC Module. After doing this, SSH clients that have connected to the TRANSEC
Module before will usually note or warn that the host key has changed when they connect
again.
Click On or Off to set administrative access to the console, then click Update SS to
implement this setting.
10.4.1.7 HTTPS
Item Description
Certificate Signature
Displays the digital fingerprint of the installed SSL certificate, which helps identify the
certificate.
CA File Signature Displays the digital fingerprint of the installed CA File, which helps identify the file.
Resets the SSL certificate to the factory default.