Comtech EF Data SLM-5650B - Remote Commands; Queries

SLM-5650B Satellite Modem
Revision 2
Appendix C C–7 MN-SLM-5650B
C.6 Remote Commands / Queries
Index Notes: Where Column ‘C’ = Command and Column ‘Q’ = Query, columns marked ‘X’ designate instruction code as Command
only, Query only, or Command/Query.
In the following Remote Command/Queries index tables:
• CODE, XXX indicates a priority command;
• XXX
O
indicates a command/query that is valid only when an optional interface module has been installed in the SLM-5650B.
Initial Setup – Priority Commands / Queries
CODE C Q PAGE CODE C Q PAGE CODE C Q PAGE
ITF C–11 MOM - X C–12 RFB X X C–12
Modulator (Tx) Commands / Queries
CODE C Q PAGE CODE C Q PAGE CODE C Q PAGE CODE C Q PAGE
BEI X - C–15 TCW X X C–16 TFQ X X C–17 TSE X X C–19
BTX X X C–15 TDE X X C–17 TMD X X C–14 TSF X X C–19
SCT X X C–15 TDF X X C–17 TPL X X C–17 TSI X X C–19
TBO X X C–15 TDI X X C–17 TPM X X C–18 TXF - X C–20
TCI X X C–16 TDR X X C–15 TRD X X C–18 TXO X X C–20
TCK X X C–16 TFM X X C–13 TRS X X C–18
TCR X X C–14 TFT X X C–13 TSC X X C–19