SLM-5650B Satellite Modem
Revision 2
Network Processor (NP) Interface 8–37 MN-SLM-5650B
8.6.5.4.3 LAN | ARP (ARP Table)
Figure 8-26. LAN | ARP Page
ARP Table (Edit Static ARPs)
This table displays all current ARP entries (both Static and Dynamic). The current Static ARPs may
be directly edited here:
Column Description
Index Displays the internal table index (read-only, cannot be edited).
Entry IP Address, format XXX.XXX.XXX.XXX
Entry MAC Address, format YY:YY:YY:YY:YY:YY
Type Displays the Entry Type as Static or Dynamic (read-only, cannot be edited)
Click [Submit Changes] to save all changes made in this section.
Add Static ARP
Use this section to directly add a Static ARP entry, and then click [Add Entry] to add the entry.
Note that the index will automatically increment to the next available number.
Delete Static ARP
Enter Entry Index to Delete: Type in the Index number, and then click [Delete Entry] to execute
removal of the entry.
Flush Dynamic ARPs
Click [Flush ARP Table] to execute the command as needed.