Comtech EF Data SLM-5650B - OSPF Configuration (F)

SLM-5650B Satellite Modem
Revision 2
NP Interface Telnet/SSH CLI Operation 9–30 MN-SLM-5650B
9.2.9 OSPF Configuration (F)
When the OSPF Menu page is opened from the Main Menu, the following page appears:
The page contains the following options or fields:
Menu Options/Fields Entry Description
OSPF E
Enables or Disables the Open Shortest Path First operation. Typing
‘E’ prompts user to select:
0 – Disabled
1 – Enabled
Area Network Address
N
See Chapter Section 8.6.5.6.2 Routing | OSPF for an overview of
command functionality and/or information presented for these
functions.
Area Subnet Mask
M
OSPF Area
A
Cost
C
Retransmit Interval
R
Transmit Delay
T
Priority
P
Hello Interval
H
Dead Interval
D
Authentication Key
K
Message Digest Key
J
Submit Changes Z
Saves any changes made on this page to the OSPF operating
parameters.