Comtech EF Data SLM-5650B - 5.2.7 SELECT: Utility; Utility: RT-Clk; Utility: Refadjust; Utility: ID

SLM-5650B Satellite Modem
Revision 2
Front Panel Operation 5–42 MN-SLM-5650B
5.2.7 SELECT: Utility
UTIL: RT-Clk RefAdjust ID Display Temp
Agc Alarm Firmware FAST (E)
Use the arrow keys to select RT-Clk, RefAdjust, ID, Display, Temp, Agc, Alarm, Alarm,
Firmware, or FAST, and then press [ENT].
5.2.7.1 Utility: RT-Clk
RT-Clk: Time: 14:29:10
Date: 19/06/17 (E)
Use the  arrow keys to select and set the Real-Time Clock. Hours are in 24 hour time
(HH:MM:SS) format. The date is shown in DAY/MONTH/YEAR format in accordance with
European format.
5.2.7.2 Utility: RefAdjust
Internal 10 MHz Ref Freq
Fine Adjust: 3F3 (E)
Use the  arrow keys to select and adjust the internal high stability 10 MHz oscillator
to counteract aging. The control value is in hex – not decimal – and has a range of 000 to
FFF. The typical calibration point for a modem is nominally around 400.
5.2.7.3 Utility: ID
Edit Circuit ID: (E)
------------------------
Use the  arrow keys to name the communications link. This name can be any
combination of alphanumeric characters up to 24 characters in length.
Additional characters supported are: ( ) * + / . (period) , (comma) and space.
5.2.7.4 Utility: Display
Edit Display Brightness:
100% (E)
Use the  arrow keys to adjust the front panel display brightness. Valid settings are 25%,
50%, 75% or 100%.