Comtech EF Data SLM-5650B - Initial Setup - Priority Commands; Queries

SLM-5650B Satellite Modem
Revision 2
Appendix C C–11 MN-SLM-5650B
C.6.1 Initial Setup – Priority Commands / Queries
Before executing any Modem, Unit, Bulk/Global, or Interface commands/queries, initial setup should be accomplished with this command.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to
Query
Interface Type ITF=
1 byte,
value 0 thru 7
Command or Query.
Interface Type, where:
0 = EIA-530
1 = HSSI
2 = Unbalance G.703
3 = Balanced G.703
4 = GigaBit Ethernet Interface
5 = Reserved
6 = Network Processor Card
7 = LVDS Interface
Example: ITF=0 (sets EIA-530 interface type)
ITF=
ITF?
ITF*
ITF#
ITF? ITF=x
(see Description of
Arguments)