Comtech EF Data SLM-5650B - Telnet Interface; Table 6-1. Alarms and Faults Snmpv1 Traps; Table 6-2. Alarms and Faults Snmpv2 C;Snmpv3 Notification

SLM-5650B Satellite Modem
Revision 2
Ethernet-Based Management 6–7 MN-SLM-5650B
The modem supports the following Alarms and Faults SNMPv1 traps / SNMPv2 notifications:
Table 6-1. Alarms and Faults SNMPv1 Traps
slm5650UnitAlarmV1
62471081
slm5650TxTrafficAlarmV1
62471082
slm5650RxTrafficAlarmV1
62471083
slm5650RedundancyStateV1
62471084
Table 6-2. Alarms and Faults SNMPv2c/SNMPv3 Notification
slm5650UnitAlarmV2 1.3.6.1.4.1.6247.108.1.3.2.1.15
slm5650TxTrafficAlarmV2 1.3.6.1.4.1.6247.108.1.3.2.2.11
slm5650RxTrafficAlarmV2 1.3.6.1.4.1.6247.108.1.3.2.3.20
slm5650RedundancyStateV2 1.3.6.1.4.1.6247.108.1.3.9.1
6.5 Telnet Interface
Chapter 9. NP INTERFACE TELNET/SSH CLI OPERATION
A Telnet interface is provided for the purpose of Equipment M&C via the standard Remote
Control protocol. The Telnet interface requires login at the Administrator and Read/Write User
Access Levels.
An example of the login
process is shown in this
example to the right: