SLM-5650B Satellite Modem
Revision 2
Base Modem HTTP/HTTPS Interface 7–11 MN-SLM-5650B
7.4.3 Configuration (Modem Configuration) Pages
The ‘Configuration’ pages are used to configure the Modulator, Demodulator, and Ethernet
Bridge interface.
Select the Modem, Utils, LoadStore, Spreading, CnC, AUPC, AHO, or ODU tabs to continue.
Configuration | Modem
Use this page to configure modem configuration parameters including Modem Frequency Band;
Transmit/Receive; and Tx Power Level.
The Configuration Pages may change slightly, depending on the modem
type selected. Not all modem parameters are valid, and could be hidden,
when certain modem types are selected.
Figure 7-6. Configuration | Modem Page
Click [Submit] as needed in each section to save any changes.