37
DEEP LEARNING PLUS USER MANUAL
ENTER/EXIT AREA DETECTION
Enter/Exit Area Detection is a function that is triggered whenever a new target object enters or exits a
configured area within the video source field of view. For example, the system can be set to trigger if
a person enters a restricted area, such as railway lines. Objects will only trigger once for entering an
area and once for exiting an area. Detection is based upon the centre point of a target object.
To configure a Enter/Exit Area Detection DL Trigger, please follow the steps below:
1. From the <SETUP> tab, navigate to <DL SECURITY> - <DL TRIGGER> menu.
2. Select the <ENTER/EXIT> tab.
3. Click the <ADD> button to create a new Enter/Exit Area Detection DL Trigger.
To Next Page
Loading...
