DEEP LEARNING PLUS USER MANUAL
40
4. Configure the Line Crossing Detection parameters as desired:
a. Video Source: Select a desired channel for Line Crossing Detection.
b. Name: Enter a custom Line Crossing Detection Trigger preset name.
c. Target Object: Select an object type for detection (person/bike/car).
At least one target object must be selected.
d. Direction: Select the tracking method for detection (forward/reverse/both).
e. Advanced Setup: If selected, additional configuration options will appear.
f. Crossing Count: Set the number at which event detection will occur
(e.g., crossing count=1 results in triggering every object detected, crossing count=2
results in triggering every 2nd, 4th, 6th, etc. object detection).
g. Forward Direction Label: Enter a custom label for the on-screen forward objects counter
widget. Note: this label only displays on DL PLUS live video (web/HDMI display output).
h. Reverse Direction Label: Enter a custom label for the on-screen reverse objects counter
widget. Note: this label only displays on DL PLUS live video (web/HDMI display output).
i. Count Reset: Select a time for resetting the Line Crossing Detection counter, or
manually reset the counter.
5. If desired, import an existing detection rule line. Or, create a new line by clicking and
dragging the corners of the yellow line. Clicking within the line allows for multiple
manipulation points to be created to fit any irregular line.
6. Click and drag the red widget that will display the Line Crossing Detection trigger count.
7. When all parameters are configured, click <APPLY> to save the settings.
To Next Page
Loading...
