Concept Pro DEEP LEARNING PLUS - Page 47

47
DEEP LEARNING PLUS USER MANUAL
c. URL: Enter the target address for HTTP commands.
d. Authentication: Select whether to use authentication for commands (None/Basic/
Digest). Basic or Digest should be used if HTTPS protocol is selected.
e. Method: Select GET or POST method for HTTP command preset.
f. Content Type: Set to multipart/form-data by default for POST method.
g. Attach Snapshot: Select if image snapshot(s) of the event should be attached to the
event notification e-mail.
h. Snapshot Time Range: Select a time range for event snapshots to be included. Image
snapshots will be saved and sent for every second of the configured snapshot time
range (e.g., if set to 2 secs before and 5 seconds after each event e-mail will have 7
image snapshots attached). This increases the chance of a useful image snapshot
being attached to the event notification but may result in slower transmission times.
i. Event Action Message: Select to use a pre-existing event template or create a custom
template to contain only the information required. Templates include Sureview XML,
JSON, JSON (pretty), Simple Message, Basic Message, and Object List. Select any
additional information tokens from the drop-down menu and click <ADD> to add
upon an existing or custom template.
j. Editable Box: Move tokens around and make the template fit a desired format.
k. Message Example: Displays an example of the configured template.
l. Send Example Message: Click <TEST> to send a test HTTP command to the
configured target address to confirm the connection is working.
5. When all parameters are configured, click <APPLY> to save the settings.