Concept Pro DEEP LEARNING PLUS - Page 58

DEEP LEARNING PLUS USER MANUAL
58
3. Review and configure the Sequrinet parameters shown:
a. Name: Enter a custom name for the Sequrinet preset.
b. Host: Enter the address of the target Concept Pro recorder.
c. Port: Enter the port number of the target Concept Pro recorder.
d. Protocol: Select HTTP/HTTPS protocol (depending on recorder setting).
e. Username: Enter the username of the target Concept Pro recorder.
f. Password: Enter the password of the target Concept Pro recorder.
g. Connection: Press <CHECK> to verify device connection.
h. Event Data: Check to transmit event metadata to the target Concept Pro recorder.
This is recommended for all Universal Mode applications as it is required to update
the recorder live event timeline, trigger DL/alarm recording and DL events, and allow
for searching and filtering events from the DL Search menu.
i. Panic Recording: Check to trigger panic recording on the target Concept Pro recorder
when deep learning events are detected.
4. When all parameters are configured, click <APPLY> to save the settings.