17Condair UDC
5. Select last day of holiday and complete switching event
Select the last day of the holiday schedule. The day ashes.
Press the <Up> or <Down> button to select the day.
Press the <Enter> button to complete the operation.
The 5 bars indicate that step 5 is complete.
After pressing the <Enter> button, you have returned to point 3.2. Now you can start
creating the weekly schedules for programs 2 - 12. Appropriate times, weekdays
as well as control loops or outputs can then be specied.
Pr01
01.01
To Next Page
Loading...
