6. Appendix
BX-220 User’s manual
71
Table 6.1 POST code < 3 / 3 >
Description
Configuration reset (Reset the NVRAM settings)
For future AMI codes reserved
OEM BDS initialization code
S1 sleep system during migration.
S2 sleep system during migration.
S3 sleep system during migration.
S4 sleep system during migration.
S5 sleep system during migration.
From S1 sleep state during system restoration
From S2 sleep state during system restoration
From S3 sleep state during system restoration
From S4 sleep state during system restoration
Move to system ACPI mode. The interrupt controller PIC mode.
Move to system ACPI mode. The interrupt controller APIC mode.
To Next Page
Loading...
Need help?
General
