-
-
-
- 4 -
-
-
-
and power plug-in are at the rear panel.
This monitor is a user-friendly device with operations conducted by a few buttons and a rotary knob on
the front panel. Refer to 1.3 Button Functions for details.
The visible LEDs are CLASS 1 LED PRODUCT according with EN 60825-1 A11 Oct 1996.
The Monitor performs monitoring of:
ECG
ECG
ECG
ECG
Heart Rate ( HR )
2-channel ECG waveforms
Arrhythmia and S-T segment analysis ( optional )
RESP
RESP
RESP
RESP
Respiratory Rate (RR)
Respiration Waveform
SpO
SpO
SpO
SpO
2
2
2
2
Oxygen Saturation (SpO
2
), Pulse Rate (PR)
SpO
2
Plethysmogram
NIBP
NIBP
NIBP
NIBP
Systolic Pressure (N S ), Diastolic Pressure (N D ), Mean Pressure
(N M )
TEMP
TEMP
TEMP
TEMP
Channel-1 Temperature ( T1 ), Channel-2 Temperature ( T2 ),
Temperature Difference between two channels ( TD )
IBP
IBP
IBP
IBP
Channel-1 SYS, DIA, MAP
Channel-2 SYS, DIA, MAP
Dual-IBP waveforms
CO
CO
CO
CO
2
2
2
2
End Tidal CO
2
EtCO
2
Inspried Minimum CO
2
(InsCO
2
)
Air Way Respriation Rate(AwRR)
The monitor provides extensive functions as visual & audible alarm, storage and report printout for
trend data, NIBP measurements, and alarm events , oxyCRG, Vie w B ed , and drug dose calculation
function is provided too .
1.2
1.2
1.2
1.2 Screen
Screen
Screen
Screen Display
Display
Display
Display
The display of the multi-parameter monitor is a color LCD, which can display the collected patient
parameters, waveforms, alarm information as well as bed number, time and monitor status, etc.
The screen is divided into three areas (Figure 1- 1 ) : Information area ①④ ; waveform area ② ; parameter
area ③ .
②
①
④
③
Figure
Figure
Figure
Figure 1
1
1
1 -1
-1
-1
-1 Main
Main
Main
Main Display
Display
Display
Display
Information
Information
Information
Information Area
Area
Area
Area
The M essage A rea is at the top and bottom part of the screen, display ing the current status of both the
monitor and the patient .
To Next Page
Loading...
Need help?
General
