-
-
-
- 40 -
-
-
-
C
C
C
C hapter6
hapter6
hapter6
hapter6 Recording
Recording
Recording
Recording
General information on recording
Instructions for configuring and recording
Recording messages
6.1
6.1
6.1
6.1 General
General
General
General Information
Information
Information
Information on
on
on
on Recording
Recording
Recording
Recording
A
thermal dot matrices recorder with 48mm wide printout paper is used for the Monitor.
Performance
Performance
Performance
Performance of
of
of
of the
the
the
the Recorder
Recorder
Recorder
Recorder
Waveform record is printed out at a rate of 25 or 50 mm/s.
It can record up to 2 waveforms.
Output with grid selectable.
English printout.
The real time recording time and waveform are user-configurable.
Auto recording interval is set by the user, the waveform is in accordance with the real time
recording.
The alarm recording waveform is automatically selected by the monitor.
6.2
6.2
6.2
6.2 Recording
Recording
Recording
Recording Type
Type
Type
Type
The monitor provides several stripe recording types:
Continuous real-time recording
8 second real-time recording
Auto 8 second recording
Alarm recording
Waveform freeze recording
Trend graph/table recording
ARR events review recording
Alarm event recording
NIBP review recording
Drug calculation titration recording
Real-time
Real-time
Real-time
Real-time Recording
Recording
Recording
Recording
Real-time recording start s as you press the REC /STOP button on the recorder.
The waveforms for continuous real-time recording and continuous 8 second recording are
automatically set by the monitor (usually the first two waveforms displayed on the screen).
You
can also
configure it through the menu. Refer to related section for details.
In RECORD SETUP menu, the user can choose two waveforms to be printed out. The User can setup
one waveform off. Thus, the real time record will print out one waveform. If two waveforms are off, the
real time record will print out measure parameters only.
To Next Page
Loading...
Need help?
General
