Contec CMS8000 - Titration Table

-
-
-
- 53 -
-
-
-
patient
patient
patient
patient being
being
being
being currently
currently
currently
currently monitored.
monitored.
monitored.
monitored.
8.2
8.2
8.2
8.2 Titration
Titration
Titration
Titration Table
Table
Table
Table
Access
Access
Access
Access titration
titration
titration
titration table:
table:
table:
table:
Select TITRATION item in DRUG CALC menu to enter titration table display.
Titration table display for drug is as following:
Figure
Figure
Figure
Figure 8-
8-
8-
8- 2
2
2
2 TITRATION
TITRATION
TITRATION
TITRATION
 Method to operate the titration table:
1. In the TITRATION table, turn the knob to pick BASIC item. Press and turn the knob to select either
FLOW RATE or DOSE or DROP RATE.
2. Then turn the knob to pick STEP item. Press and turn the knob to select step. 1 ~ 10 are available
for selection with the increment being 1.
3. Turn the knob to pick DOSE TYPE item. Press and turn the knob to select the unit in the pull-down
list.
4. Use UP-DOWN item in the table to view the data in previous or following pages.
5. Turn the knob to pick REC item. After pressing the knob, the recorder prints out the data displayed
in the current titration table.
6. Turn the knob to pick EXIT to return to DRUG CALC menu.
Total amount, dose, volume, flow-rate, drop rate and patient weight and drug name are displayed on
the top of the titration table. Meaning of each English identifier is:
AMOUNT : drug amount
VOLUME : liquid volume
DOSE/min : drug dose
FLOW RATE : flow rate
DROP RATE : drop rate
WEIGHT : patient weight