Contec CMS8000 - 9.8 Replacing AC;DC Power Supply

-
-
-
- 47 -
-
-
-
To
To
To
To change
change
change
change the
the
the
the display
display
display
display scale
scale
scale
scale
Pick the “ ZOOM ” button in the lower line to adjust the y-axis scale and thus change the trend curve in
proportion. The value beyond maximum value will be represented by the maximum value.
To
To
To
To obtain
obtain
obtain
obtain trend
trend
trend
trend data
data
data
data of
of
of
of a
a
a
a specific
specific
specific
specific time
time
time
time
The time to which the cursor points will change as the knob is turned. Parameter at this time is
displayed below the x-axis. When " " appears on the right part of the screen, the trend graph pages
down for later trend curve as the cursor moves here. When " " appears on the left part of the
screen, the trend graph pages up for earlier trend curve as the cursor moves here.
To
To
To
To print
print
print
print out
out
out
out the
the
the
the trend
trend
trend
trend curve
curve
curve
curve
Press REC button to print out the trend curve of current selected parameter.
Mark
Mark
Mark
Mark event
event
event
event
If an event is marked A, B, C, or D, then the corresponding event type will display on the axis time of the
trend graph. The event sign (A, B, C or D) is displayed in a frame.
Operation
Operation
Operation
Operation example
example
example
example
To view the NIBP trend graph of the last 1 hour:
 Pick the MENU hot key lower right of the screen .
 Pick TREND GRAPH item.
 Pick the first item and switch to NIBP by turning the knob.
 Adjust the second item to be 1 or 5 sec.
 Pick the ZOOM button and turn the knob to view changes of the trend graph time and trend curve.
 Stop at requested trend time section for careful review. Pick the ZOOM button to adjust the display
scale if necessary.
 For measurement result of a specific time, pick CURSOR to move the cursor to the point,
corresponding time and value will display on above and below respectively.
 For printout of trend graph, pick REC to start report printing of NIBP trend of this hour.
 Pick EXIT to return to trend graph display.
7.2
7.2
7.2
7.2 Trend
Trend
Trend
Trend Table
Table
Table
Table
 The latest 72-trend table data can be displayed at every 1, 5, 10, 30, or 60 minutes.
P ick TREND TABLE in the SYSTEM MENU to call up the following menu :
Figure
Figure
Figure
Figure 7-
7-
7-
7- 2
2
2
2 TREND
TREND
TREND
TREND TABLE
TABLE
TABLE
TABLE Menu
Menu
Menu
Menu