Control Module Genus G2 - Date- Day; Date- Year; Time Zone; Restart the Terminal

Genus G2 User Manual
UM3000-1
Revision E November 2017 22
Date- Day
10. When in the correct Month, Press or to advance to and
highlight the new date.
11. Press to accept the highlighted day date.
Date- Year
The year can be edited in the date field, however if the slash separator is deleted by
Mistake, return to Step 10 to recover the date format.
12. While in the date field, use to delete and use the numeric keypad to change the year.
Time Zone
13. Press to highlight the Time Zone field.
14. Press to enter the Time Zone option list.
15. Use the arrows or to highlight an appropriate Time Zone from the
option list.
16. Pressing exits from the time zone option list and returns to the Time Zone field.
17. Use to highlight and press to save settings.
18. Use to return to the Main Menu at the bottom of the screen
Note: You will need to restart the terminal for the Time Zone change to take effect.
Restart the Terminal
If done with setup in offline mode, ensure there is power to the terminal and simply switch the
offline/online switch to online, which will reboot the terminal.
Apply