Genus G2 User Manual
UM3000-1
Revision E November 2017 4
Declarations
Warnings
Voltage: The lightning flash with arrowhead symbol, within a triangle, is intended to alert
the user to the presence of dangerous voltage within the inside of the product that may
be sufficient level to constitute a risk of electric shock to persons.
Instruction: The exclamation point, within a triangle, is intended to alert the user to the
presence of important operating and servicing instructions in the literature
accompanying the Terminal.
Disclaimer
No part of this publication may be reproduced, or transmitted in any form or by any
means without the written permission of Control Module, Inc. The information described
by this publication is specifically intended for use by customers and resellers of Control
Module Data Collection products and data collection systems and only for use with
Control Module Data Collection products and data collection systems.
© Control Module, Inc. 2016. All Rights Reserved.
Genus
is a registered trademark of Control Module, Inc. Other brands and names
contained in this document are the property of their respective owners.
The information in this manual is subject to change without notice and does not
represent a commitment on the part on Control Module, Inc.
FCC Compliance
The Control Module Model Genus G2 Time and Attendance Terminal conforms to the requirements
of FCC PART 15, SUBPART B, CLASS A, 2004 for radiated and conducted emissions without
modifications.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at their own expense.
Servicing
Do not attempt to repair this product yourself. Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing and installation to qualified personnel. Refer
to the Service & Technical Support section at the back of this document.
To Next Page
Loading...
