Genus G2 User Manual
UM3000-1
Revision E November 2017 28
4. Press to advance to and highlight Apply.
5. Press to test the reader.
Messages from the reader test may either prompt the user or provide information.
These messages are as follows:
Place Finger on Sensor...
Finger enrolled, Remove Finger
Place Finger on Sensor...
Finger Verified, Remove Finger
Template Deleted.
Test Passed!
Test Failed!
6. Press to calibrate the reader.
Messages from the reader calibration may also prompt or provide information.
These messages are as follows:
Calibrating Please do not touch sensor
Calibration Successful
Calibration Failed
7. Choose a Configured Com Port by using the arrow keys.
Messages from Com Port changes are as follows:
Connecting to reader...
Connection attempt failed!
8. Press to highlight Apply .
9. Press to save and return to the previous screen.
10. Or press to exit
To Next Page
Loading...
