Need help?Do you have a question about the Control Techniques COMMANDER SE and is the answer not in the manual?
General| Manufacturer | Control Techniques |
|---|---|
| Series | Commander SE |
| Frequency Range | 50/60 Hz |
| Humidity | Up to 95% non-condensing |
| Input Voltage | 200-240VAC, 380-480VAC |
| Control Method | Sensorless Vector Control |
| Communication Protocols | Modbus RTU, CANopen |
| Enclosure Rating | IP20 |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Storage Temperature | -40°C to +70°C |
To Next Page
