How to fix product bowl blades that do not turn in Cornelius Commercial Food Equipment?
If the product bowl blades in your Cornelius Commercial Food Equipment aren't turning, first check that the hopper product viscosity is within limits and correct as necessary. Next, inspect the connections to the hopper motor and correct as needed. If the issue persists, the control board or the product bowl motor may be faulty and require replacement.
General safety guidance including reading manual and labels.
Understand the meanings of DANGER, WARNING, and CAUTION alerts.
Only trained technicians should service the unit, adhering to codes.
Guidelines for safely transporting and storing the unit.
Hazards of CO2 gas leaks and essential ventilation procedures.
Risks of electric shock and safe handling of electrical components.
Intended use and user limitations for the Helix unit.
Overview of the Helix unit as an automated smoothie machine.
Key functionalities and benefits of the Helix unit.
Technical details and operational parameters of the Helix unit.
Steps to prepare the unit's CO2/air and water systems.
Steps for sanitizing the ice hopper before initial use.
Instructions on how to power on and start the Helix unit.
Procedures for cleaning and sanitizing the entire unit system.
How to operate the blenders and dispense drinks.
Step-by-step guide to dispensing beverages.
Procedure for replacing product bags (syrup bags).
Guidelines for maintaining and checking cabinet temperature.
Scheduled maintenance tasks performed weekly.
Scheduled maintenance tasks performed monthly.
Procedure for inspecting auger bearings for wear.
Understanding alarms displayed on the unit's main screen.
Information on ingredient, water, and CO2/air sold out conditions.
Diagnosing and resolving issues related to unit controls and activity.
Identifying and fixing causes for the unit not cooling products.
To Next Page
General